81.525 : TOPRING NFPA PNEUMATIC CYLINDER 1-1/2" X 25"
TOPRING PRODUCTS ARE DROPSHIPPED DIRECT FROM TOPRING WAREHOUSE IN QUEBEC
81.525 : NFPA PNEUMATIC CYLINDER 1-1/2" X 25"
SPECIFICATIONS
• Working Fluid: Air
• Operating Pressure Range: 15 to 250 PSI
• Lubrification: Not necessary
• Temperature Range: -45 to 110 °C
Material(s):
CUSHIONING ADJUSTMENT Cushioning is adjusted prior to shipment, but the cushion effect may change due to cylinder speed, load and inertial force. When necessary, adjust the cushion needle as follows: turn cushion needle to the left or right, and adjust speed at stroke end so that shock is minimal and operation smoothness is optimal. Turning to the left (right) opens (closes) the cushion needle. CYLINDER SPEED ADJUSTMENT Maximum cylinder operating speed is 25"/sec. If this speed is exceeded, the rod gland and seals will wear rapidly and the shock at stroke-end will increase. The result is shortened cylinder life and susceptibility to malfunction. If cylinder speed is too low, the result will be sticking, slipping and unstable operation. Cylinder speed varies depending on supply and exhaust tube diameter, air pressure, flow rate and load, and therefore must be adjusted to suit the intended use. Adjustment is normally done using a speed control valve, but this is not always enough, and other factors may have to be considered (air pressure, load, etc.).
FEATURES
• Meet NFPA standards
• NFPA-MS4 standard mounting styles
• Made of corrosion-resistant Aluminum
• Adjustable cushions on both ends
• High strength