Mechanically coupled cylinders
Mechanically coupled cylinders describe pneumatic rodless linear actuators whose slides are moved by a mechanical coupling with the piston. With this design, the pneumatic space is opened in the longitudinal direction and is sealed to the outside by a flexible sealing band in front of and behind the piston. These linear drives are used in particular where piston rod cylinders require too much installation space or where the required stroke length is greater than is possible with piston rod cylinders.
Diameter 8, 12, 18, 25, 32, 40, 50, 80 mm
Stroke length 1 ... 8500 mm
Force 30 ... 3016 N
Guide variants
- Standard design
- Sliding guide
- Ball bearing guide
- Heavy-duty guide
Linear actuator DGC
Basic design, plain or ball bearing guides, guide axis without actuator
All settings accessible from one side
With optional variable end stops and intermediate position module
Linear actuator DGC-KCompact design: 30% smaller than the basic design DGC-G
Basic actuator without guide, for simple actuator functions
Low moving dead weight
Linear actuator DGC-HD
For maximum loads and torques thanks to duo rail guide
Very good operating behavior under torque load
Long service life
Linear actuator DLGF
Extremely flat design
Choice of two damping types: Self-adjusting pneumatic end-position cushioning or external hydraulic shock absorbers
Supply port at the left or right end or at both ends or alternatively from below
Linear actuator SLG
Extremely flat design
Highest precision thanks to integrated ball bearing guide
Adjustable end stops
